The STC1503 is a new addition to the line of Servo Tool Changers. It was developed in response to customer demand for a high
speed spindle with tool changing capability. As such the STC1503 supplies a constant torque from 0 to 15,000 rpm. The
1503 was designed to be mounted on an AFD1000/70 force device.
Features:
- Mounts directly to the AFD1000/70 Series
- 3.0 horsepower
(2.2 kW) servo motor
- 15000 maximum RPM (reversible)
- Sealed ceramic bearings for high axial speed
- ± 5% speed regulation
- 15 lb-ft (20N
- m) collet holding torque
- Fail-safe pneumatic collet release
- 0.5 inch (12.7mm) standard tool shaft diameter,
0.25 inch (6.35 mm) diameter
tool shaft optional
- All fittings, fasteners and threaded holes are METRIC
SPECIFICATIONS:
Motor Specifications
Power: 3.0 hp (2.2 kW)
Continuous stall torque: 1.05 lb-ft (1.4N-m)
Maximum
RPM: 15000 RPM
Speed regulation 5% (reversible)
Supply voltage: 220-270 VAC, 3f, 50/60
Hz
Collett Specifications:
Holding Torque: 15 lb-ft (20.3 N-m)
Tool shaft: 0.500 inch (12.7mm) dia.
Supply
air: Dry Non-lubricated, 90 psi
(6.2 bar) minimum
Tool weight: 20 lb (9kg)
Requires power supply, amplifier & cables
Call for appropriate
ordering information
Specification subject to change without notice
